Search
Xiamen Sinuowei Automated Science and Technology Co.,Ltd
PRODUCTS
CONTACT US
V9 CNC Electrostatic Powder Spray Gun
V9 CNC Electrostatic Powder Spray Gun
V9 Performance Introduction
Full numerical control programmable electrostatic powder spray gun, and single gun on the remote control Powder amount size for manual and automatic gun control. On the one hand, the controller has three standard pre-stored programs On the one hand, the controller has three standard programs pre-stored, which are specifically designed for spraying flat workpieces, complex workpieces and re-sprayed workpieces. On the other hand, the user can precisely control the voltage, spray current, powder output and total air volume at the touch of a button. Up to 20 programs can be stored. How to Use: Please connect the ground wire first before turning on the power supply. Wait 5 seconds before pressing the power on button after the 220V power is turned on for the first time, and wait 10 seconds for the 110V power. After the host starts, if you press the key, the passive interface will display the set value of each data, and the actual value will be displayed after 3 seconds, and the system will save all the current data.
V9 Input Key Function
 |
No. | Function |
| 1 | Add or subtract powder | |
| 2 | Nebulization plus or minus | |
| 3 | electrostatic additions and subtractions | |
| 4 | cleansing gas plus or minus | |
| 5 | Program selection plus or minus | |
| 6 | New Workpiece Coating Patterns | |
| 7 | Notched Position Spray Patterns | |
| 8 | Coating mode for repetitive sprayed parts | |
| 9 | Program switching key (manual and switching between three modes) | |
| 10 | Secondary menu switching key (setting cleaning gas) | |
| 11 | Static switch key | |
| 12 | work instruction | |
| 13 | power-on indication | |
| 14 | power indicator | |
| 15 | Powe key | |
| 16 | Fluidization control | |
| 17 | Fluidizing Pressure Indicator |
V9 Back interface function
 |
No. | Function |
| 1 | 220VAC power cord | |
| 2 | Single Gun Control Line Interface | |
| 3 | Mainframe Ground | |
| 4 | Air input 2. φ8 connector | |
| 5 | Powder pump powder quantity interface φ8 | |
| 6 | Powder pump atomization interface 6 | |
| 7 | Electrode needle cleaning gas port φ4 | |
| 8 | Powder drum fluidization interface φ6 | |
| 9 | Air Input 1. Quick Connector | |
| 10 | φ8 gas pipe connection "4" and "11" | |
| 11 | φ8 connector |
PARAMATER FORM
|
Electronic controller systems |
Built-in electrostatic spray gun |
Pneumatic control systems |
|
Input voltage: 220V/110V |
Input voltage: 12V |
Solenoid voltage: 24VDC |
|
Input frequency: 50HZ |
Input frequency: 35KHZ |
Input air pressure: 5.5-8bar |
|
Input power: 46W |
Input current: ≤0.6A |
Compressed air moisture: ≤ma*1.3/NM3 |
|
Output voltage: 12VDC |
Output voltage: -100KVDC |
Compressed air oil content: ≤ma*0.01g/NM3 |
|
Output current: 0.1A-1A |
Output current: 0-100UA |
Air flow: ma*19g/NM₃ |
|
Valve control voltage: 24VDC |
Connection cable: 5M |
|
|
Input cable: 2.5M |
|
|
List of configurations for a single set of powder guns:
| 1. a host | 2. a single gun | 3. a set of flat nozzle, venturi | 4. environmentally friendly silicone powder tube |
| 5. high-flow powder pump a | 6. connection PU tube | 7. a stainless steel powder barrel | 8. a set of electrode holder |
| 9. a set of large, medium and small nozzle | 10. a mobile cart | 11. a ground line | 12. a set of extension rod |
Related products
Need to leave a message
We will contact you as soon as possible
Scan the code to contact us
Scan the code to contact us
